Free Power From Magnet Generator

We bought it and here is what we found out. This magnet generator is a great free electricity from a mini electric magnet generator project. You will gain so much confidence after your first generator you will want to built a bigger one right a way. Residential Energy Kit regards Magnets 4 Energy a safe buy.

Magnets 4 Energy project is based on the Perendev and Bedini (the wheel) magnetic motor principles; but, repackaged for easy home construction to make free electricity from a mini electric magnet generator. Magnets 4 Energy is very easy to build and modify for smaller or larger scale.

Read More Click Here

Contributed by Sterling Allan (Reporter)
Wednesday, April 14, 2010 2:55

Over the years, the term “Perendev” has become nearly synonymous with the idea of all-magnet motors. Citing the need for sole director, Michael Brady, to take care of severe legal proceedings abroad against his person, Perendev Power Holding AG is saying that he will not be able to attend to Perendev tasks, which may lead to its insolvency. Their website is gone..

Eight years ago, I got my start in the world of free energy by becoming acquainted with Mike Brady, then in Johannesburg, South Africa.  I had posted a page about free energy on my religiopolitical commentary website, and he responded with a link to his website about his all-magnet motor.

I then got involved with arranging to bring him on a tour through the United States to demonstrate his motor and to help establish a network to manufacture and market it to the world.  My associates and I started a company, PerenTech (the forerunner to PES Network), and purchased Perendev.com (which we still own, redirecting it to our PESWiki coverage of the company and technology claims), and worked on the logistics of his visit to the states.  He had tickets in hand twice (which I verified), but had to cancel twice — once due to the terror alert in the U.S. going to orange, and once do to his associate getting scurvy — the same associate who shortly thereafter was discovered to be embezzling funds from Perendev.  The third proposed visit attempt was scrapped due to an “eddy current” problem in the aluminum housing causing the motor to slow down

He then fabricated a new rig out of some kind of plastic; and two associates, including Susan Carter, and myself flew over to Johannesburg in December of 2002.  We arrived in time to take his newly-fabricated magnet motor out of the machine shop and assemble the motor.  However, we were not able to get it to run in the week that we were there.  He said it is a matter of getting the magnets positioned right.  Not all the holes are populated.  It’s a matter of timing.

Two months later, he sent me a video of it running, though the footage wasn’t skeptic-proof.  Our engineer suspected that there was some kind of cheater device behind the motor to get running, which was then removed during the walk-around.  I’ve always believed that the footage was genuine. That is the footage which a couple of years later he allowed me to post with a story where we announced Brady’s intention to do a demonstration of the technology on German television.  Though the TV thing didn’t materialize, the video ended up on YouTube and has been seen millions of times.

A mechanical engineer associate of ours, Douglass K. Furr, built a beautiful 1/4-scale replication of the Perendev all-magnet motor, with Brady’s permission; but we couldn’t get it to run, though we tried a bunch of different magnet configurations.  Quite a few people have seen videos of that replications, and even though I state in the video that I’m spinning it by hand, I still occasionally get calls or emails from people who think it is running from the power of magnets alone.

Our replication varied from Brady’s design both in scale and by bringing the rotors in from the side rather than via the clam-shell design of Brady’s.
 

Ever since we launched PESWiki.com in Aug. 2004, our Perendev page has been one of the most visited pages on the site.  Our Magnet Motor general index page is also one of the most popular pages.  On our Best Exotic Free Energy Technologies page, Perendev has been the only entry under the heading “Alleged Commercial”.

Though I consider myself a steadfast believer in the possibility of an all-magnet motor being able to provide base-load power, I have not yet personally seen such a motor running, though I am hopeful that this status will change soon, due to a couple of alleged Perendev replications that I’ve become aware of.  We recently ran a couple of stories about other apparent replications.  And I’ve talked to three or four people who claim to have personally seen Brady’s all-magnet motor running.

During all this time, I’ve believed that Brady actually did get an all-magnet motor running, and possibly even an electromagnetic version of that motor, but I have taken exception to his business practices, and have urged caution to any who have asked me my opinion; and I’ve expressed that caution on our PESWiki page about Perendev.

More recently I’ve become aware of a 1989 patent that embodies Brady’s design, but pre-dates it by a decade — and which is now expired.  Brady apparently was also aware of that patent, and it may have been the primary basis of his design.  I know that when he was taking us around Johannesburg, he didn’t have any compunction against buying some pirated DVD’s being sold along the roadside.  To his credit, he was a very gracious host.

As long as I’ve been aware, the story of Perendev has been a story of continued promises, continued hope for pending delivery, continued delays, continued alleged back-stabbing episodes by formerly trusted associates, continued disenchanted customers who haven’t received product they paid for, and alleged pilfering of money by bad associates.  It’s the perpetual “soon” that never quite materializes.  I’ve never spoken to a customer who has received a working product (though that is somewhat understandable inasmuch as he supposedly makes them sign secrecy agreements).

Just guessing, I would say that in the eight years I’ve know him, there have been at least eight times when he was going to be going into production, but I was never able to verify any of the times when he was alleged to have actually made it to production.

Today I learned that Perendev is apparently closing their doors.  The following statement comes by an auto-responder when an email is sent to Brady.  The perendev-power.com website is gone.

Dear Customers and Partners of Perendev Power Holding AGWe regret to inform you that our sole director Michael J. Brady has to take care of severe legal proceedings abroad against his person and has therefore no longer the capacity to fulfil [sic] his functions with regard to Perendev Power Holding AG. Michael J. Brady regrets deeply that this leaves the company and its plans for a bright future with all of you behind. But he has no other choice, now, than to put all his efforts into fighting these false allegations. Although he has no possibility to evade this constellation, he apologizes for all the problems this causes to all of you. In this situation, Perendev Power Holding AG will most probably not be able to avoid in-solvency [sic]. To those who have investments or claims at stake, we give the advice to appoint a lawyer in Switzerland to follow such proceedings. Perendev

Before their site went down, it said in part: 

“Perendev is planning a production plant in Switzerland. [...]

“Our plant once in production will produce the Magnetic motor/generator, Hydrogen technology ( water to Fuel ) and a number of other technologies aimed at improving our world.

“We are planning a show in Switzerland to demonstrate Perendev’s technology in the very near future.

“Perendev is the No 1 Alternative company in the world today.  It is not something that happened overnight.  It has taken years and total dedication to achieve this goal, through hard work and the vision to change the way the world uses energy.

“We would like to point out that in 1998, there was very little in Publicity regarding magnetic motors, Perendev advertised on the Internet that they had developed a magnetic engine, since then many people have developed or try to develop Magnetic engines. We wish all who are doing this to continue and show the world that there is a better way of using energy.

” Demonstration planned in the near future, please return for update and dates for the projected launch of the 300kw motor. Our Hydrogen project is going well and we are getting ready to install the unit in our Toyota Hybrid.

“We will demonstrate the Hydrogen project on stage with a mounted running engine.”

Despite all their problems over the years, I’ve always told Brady that I hope he succeeds in bringing an all-magnet motor or a self-looped electromagnetic version to market; and I’ve hoped that the right kind of people could come along to help him overcome some of the heavy challenges he has faced.

If he personally is removed from the ring, he deserves some kind of credit for spurring the imagination of so many, including two I know of who may have achieved a variation that could appear in the market not too long from now.  Despite all his challenges, I think Brady deserves “honorable mention” in this magnet motor saga.  Maybe he will yet rebound from whatever it is that is closing his doors for now.

# # #

January 30, 1:05 AMSterling Allan

 

In a YouTube video, user ubozkurt1 gives the rotor on his Perendev replica a push by hand to get close to what appears to be a resonant speed which then appears to be maintained by the magnetic interactions alone. Visual and audio analysis conclude “constant speed”.

On Dec. 26, 2008, YouTube user ubozkurt1 posted a video of what appears to be a test jig showing just two magnets in a rotor to demonstrate the concept presented in the famous Perendev all-magnet motor.

In this video, ubozkurt1 gives the rotor a push by hand to kick-start the rotor. It takes several tries to get close to what appears to be a resonant point in a speed which then appears to be maintained at a constant speed by the magnetic interactions alone. He then stops the rotation by hand and starts it again with the same effect.

Off to the side, you can see a rotor that more closely resembles the Perendev design seen ubiquitously on the web, and featured here at PESWiki (we own perendev.com, which forwards to our page).

Lightrider, who is expert at analyzing such video footage, analyzed both the video and audio components of this video this past week and concluded that there is indeed a stable speed achieved almost immediately and maintained until manually stopped.

We don’t know of any replications of this effect, but if there is not any trickery involved in this video, it would constitute a validation of the Perendev all-magnet motor.

Stefan Hartmann, of OverUnity.com, said that the replicator apparently is Turkish. “Somebody of my forum speaking Turkish language emailed him; and he said, that it worked, but that he is only an amateur tinkering with this stuff.” He’s not posted any more videos and has not communicated further that we know of.

Here is ubozkurt1′s video:

Please visit our PESWiki feature page on this development for more information, and to post any replications you know of.

# # #

(Editors note: Consider you could make your own “PERENDEV” motor by next weekend with the Magnet Motor Guides recommended here. Think FREE Power in less than a week.)

The Perendev, originally coined from the phrase “perpetual energy device,” but later changed to the more politically correct, “permanent energy device”.

A magnetic motor (or magnet motor) is a device which converts power of or relating to or caused by magnetism (e.g., “magnetic forces”) into mechanical force and motion, with no other input. It usually provides rotary mechanical motion. The machines that utilizes the properties of a magnet for mechanical energy.

Running Magnet Motors Witnessed

Have you ever seen a magnet motor in operation? By “magnet motor”, I mean a motor in which magnets are the only driving force. Maybe its via magnets repelling magnets, or attracting, or both; and the result is continuous rotation.

 

Four of twenty New Energy Congress members who responded to an anonymous poll this past week said they had. One out of every five — twenty percent — of those who answered the poll have personally seen a magnet motor in operation. I wasn’t one of them.

 

Conventional physics says that it is “impossible” for magnets to provide a primary energy source. Yet thousands of researchers worldwide have been pursuing the task of building a working magnet motor. Many claim to have achieved this objective. Most of those are quiet about their accomplishment. None have reached the marketplace.

 

Science tends to lag behind inventors who don’t know what is or is not possible, revising their laws to fit the new observations. If magnet motors really are possible, scientists will no doubt figure out where the energy is coming from, whether it is from the Zero Point, or from some new principle of magnetism hitherto not appreciated.

 

The Steorn “Orbo” is allegedly one such motor, which was supposed to have been debuted for the world to see on July 4, 2007, but it ran into problems, and instead the world saw a gizmo not running. (Ref.)

 

Meanwhile, millions have seen a video of what appears to be a running magnet motor — the Perendev, originally coined from the phrase “perpetual energy device,” but later changed to the more politically correct, “permanent energy device”. (Ref.1, ref.2, ref.3)

 

Myself (left) with Mike Brady, assembling his Perendev magnet motor.

I happen to have been involved in that motor. I helped assemble it in Johannesburg in December of 2002 when it came from the machine shop, but we couldn’t get it to run during the week that we were there. The video was produced a couple of months later by the inventor, Mike Brady; and I was given permission to publish it in Aug. 2004 prior to a German television debut that was supposed to take place but which never materialized. (Ref.)

We had our mechanical engineer associate, Douglas K. Furr build a 1/4-scale replica of the Perendev design, with Brady’s permission, but were not able to get it running. For some reason, often when people see a video that has been posted of that motor, they think it is a functioning device, even though the video shows me spinning and stopping the shaft with my hand, and I state that we’ve not been able to get it to run on its own. I guess their thinking it is a functioning magnet motor is due to a wishful thinking syndrome or something.

In all this time, I’ve heard of a lot of claims to working magnet motors, some of which seem credible, but I’ve never personally witnessed one running.

I’ve also surrounded myself with a lot of experienced people in the field who are open minded but who require proof. I founded the New Energy Congress a couple of years ago in order to review the various exotic clean energy technology claims and then rank them according to a set of the criteria including renewable, affordable, credible, and safe. We compile these in a Top 100 Clean Energy Technologies listing.

Then a couple of weeks ago, when I was consulting John Dunlap, an entrepreneur who wanted to advance magnet motor technology, I was embarrassed when I couldn’t answer whether or not any of the approximate forty NEC members had personally witnessed a magnet motor running. I could answer for myself, but I couldn’t answer for them.

So on Sept. 19, I wrote to the NEC: “Have any of you members of the NEC seen a magnet motor in operation in person? “By ‘magnet motor’ I’m referring to motors that run only on magnets, with no other motive force. A separate question would be whether you were able to confirm that the magnets were not diminishing in gauss in the process of providing rotational power, but my present primary question is more broad, relating to a magnet-only-powered motor.

“It seems like maybe one or two of you have witness one in person, but I can’t recall who or what. I’ve heard of some 20 – 25 different claims to working magnet motors that seemed possibly credible, but have never seen one in person.”My second question would be, if you have seen one in operation, would you be willing to go on record as having done so?”Since it is possible that if you have seen one, you are under NDA not to disclose that, I’ve created an anonymous poll”

The wording of the poll was simple:

“Have you seen a magnet motor in operation in person? ‘Magnet motor’ = a motor that run only on magnets, with no other motive force.”

Two members of the congress came forward in the private NEC forum to discuss their experiences.

One said that he had not yet confirmed that the magnets were not diminishing over time, and that he was under NDA from giving any details, but that he was very encouraged by what he had seen. Formerly, he was among the skeptics who did not think that such a motor could be built.

The 20% affirmative response by the NEC members is not representative of the public at large, inasmuch as the NEC is composed of people who pursue exotic energy technology.

A follow-up poll has been prepared for the general public (posted above). I’ve also created a poll (Sept. 29 – Oct. 12) for the fe_updates newsletter group who received my email notices of the daily FreeEnergyNews.com news items. That group is more likely to have results resembling those of the NEC, than of the public in general. Also, the general poll above is not going to be a true reflection of the general populace inasmuch as people who come to this news page in the first place are likely to be an unusual set to begin with.

I also plan to follow this NEC poll up with additional polls of the NEC about some of the other exotic technologies we cover, such as electromagnetic overunity, electrolysis overunity, gravity wheels, and cold fusion.

Though such such polls are not the same as a scientifically sound validation using calibrated measurement tools, video documentation, and other data collection, it does help increase the hope factor for these technologies that science rebuffs — as they did human flight, among other things they said were “impossible.”

# # #

REFERENCES:

• Poll Results (private for NEC members only; Sept. 19-26, 2007)
• Preface email from Sterling to a private NEC forum (private for NEC members only; Sept. 19, 2007)

###

Referenced Links

• Zero Point Energy, The Fuel of the Future – Book by Thomas Valone, 2007.
• http://IntegrityResearchInstitute.org – Valone’s site
• Third International Conference On Future Energy – October 9-10, 2009, Washington, D.C.  Organized by Valone
• Crystals Turn Roads into Power Stations (10 December 2008, New Scientist issue 2685)
• U.S. Patent 5590031 – System for converting electromagnetic radiation energy to electrical energy. Dec 31, 1996. “First ZPE Patent”
• SPESIF – 2009 – Valone will be presenting a peer-reviewed paper on ZPE at this conference.

(editors note: from:http://pesn.com/2009/01/21/9501515_ZeroPointEnergy_Valone/)

If you are looking for Magniwork magnets I have a source for

these popular magnets contact me. -  David

davidv@residentialenergykit.com

Are Magniwork and Magnets4Energy promoting a scam? Are Magnetic Motors a scam? Are Over Unity generators a scam? Are Zero Point Motors a scam? Are Perpetual Motion Machines a scam?

Let me help you. If I were promoting perpetual motion, over unity and something-for-nothing, that would be a scam. There is no way you can get something for nothing. You can gather or convert energy from an existing force, however. There is a part of the world population always looking for something-for-nothing and when they find something that looks like something-for-nothing they jump on it. Because this population views this science as something-for-nothing it does not mean the science is claiming something-for-nothing.

Let me give you a few examples. A solar panel gathers energy for free. The source is the sun. The solar panel and sun will not do this forever. It is not perpetual. For your life span the solar panel is capable of “producing” (gathering) energy for your entire life. Does it make a difference to you that it is not perpetual? Interesting lesson on perspective.

When people thought the earth was flat, it took a sailor trying to circumnavigate the globe to prove it round. After that, perspective changed, not the truth. This happens all the time. Science does not change only the interpretation.

Magnets opposite poles attract. Move a strong magnet towards another’s opposite pole and they will snap together. What is the force that moved them? Is this force perpetual? Can this force be used over and over again to do work? Before we in the scientific world fully understand magnetism, we will make false calms about it because we do not have a choice. We just don’t know better. It’s a mystery and it is human nature to apply reason, even though the reason may be faulty. False claims should not prevent us from using magnetism’s force for work. Wouldn’t you agree?

Magniwork and Magnets4Energy are not promoting perpetual motion in my opinion. They have implemented instructions or guides to build a scientific experiment in magnetism.

Search the Internet for these terms: Zero Point Energy, Magnetic Zero Point Energy, Magnet Generator, Perpetual Motion Machine, and Over Unity Motors. You will find all the related material and know that this magnetic motor design has been around for over 25 years. Because the implemented design will “produce” (gather) power from a seemingly absent force, it looks like something-for-nothing; but is it really?

It is a challenge to accept a magnetic motor will produce its own power, yet search the internet for its various key phrases and you will find hundreds of homemade videos of experiments that demonstrate a working motor / generator without applied power. Why do these work? Is it possible that you can convert magnetism into a energy producing generator?

The working examples say yes.

What role magnetic motors will play in the future is uncertain but this we do know, an individual with curiosity and some handyman skills can build one and see for his or her self in less than a week. The two guides mentioned in this article are readily available for low cost and the materials will cost between $100 – $200.

I do believe the Magniwork customer lack of satisfaction warrants a non recommendation while Magnets4Energy is a successful hobby project to experiment in magnetic generators. More…

Free Power

Free power isn’t totally free you will need to invest in equipment; but the power you make will be free. You have a large advantage over power companies when you make free power at home. No delivery charge. 

Power companies collect power or convert it then deliver it. They divide the cost of investment over 30 to 50 years and charge you for the investment and delivery amortized over time. 

What is the delivery cost if you make your own power (Zilch, zero, nothing)? If you hire a contractor to install energy devices at your home the cost will not be much cheaper than the Power Company. Your payback period will be as high as 25 years, not much better than the Power Company’s payback period. 

The rules change when you make your own power with a do-it-yourself (DIY) approach. No delivery charge, no contractor cost and investment payback period is usually under 5 years. 

Here are seven reasons to make DIY homemade power:

 
1.) Free power is everywhere. You just need to collect it. 

 
2.) Collecting free power is easy with solar, wind, and solar hot water systems. 

 
3.) Free power investment is cheap for DIY. DIY projects can be 1/10 the cost of commercial and payback is 5-10 times faster, usually under 5 years. 

 
4.) The governments encourage free power collection. The government will pay you. In the USA the tax credit is 30% up to $2000 for solar electric and solar hot water and up to $4,000 for small wind turbine. That is not much for commercial investment of $20,000 to $80,000; but this is a lot for DIY projects of $100 to $6,000. 

 
5.) Free power is green. The more you collect the less the power company pollutes our planet. That makes a greener planet for our future and the kids’ future. 

 
6.) Do-it-yourself guides that make free power projects easy and low cost are cheap. Projects are a $100 – $200 investment. Multiple projects can get you off the grid completely. 

 
7.) Remote sites like a vacation home or cabin, hunting lodge, campsites can be powered by these free power projects, no gas generator and no kerosene. 

Solar Panels

This Is What It Looks Like

Solar panels are a collection of solar cells, soldered together into a system. The cells can be purchase on eBay for about $50 per 100 watts of power. You assemble the cells in to 70 – 175 watt panels. Installing the panels is a matter of some brackets and wire. Solar panel installation is much more flexible and portable than wind turbines. 

Solar panels produce 18+ volts in to a battery charge controller. The controller fills deep cycle batteries with the power during the day. Power can be generated most days, even with clouds. 

 The limitation of solar panels is the sun. It’s up only half the day. A power inverter converts the battery’s power to household power for your normal use, day or night. Building several panels can achieve 1000+ watts of power. 

Small Wind Turbine

DIY Wind Turbine

Wind turbine is not for everyone. You need an open space, not because they are too large but because the wind flows better in the open. You need a minimum of 10+ M.P.H. wind speed with 20+ M.P.H. being ideal. An advantage to wind turbines is the wind can blow all day to produce power day or night. Another consideration is the wind turbine needs to be on a tower. 

The taller the better, in the 20 – 60 foot range. This usually requires local zoning permits. If these are not a problem you will get twice the power out of a wind turbine than for the same investment in solar panels. The break-even point is $400. More than that, the wind turbine is less costly to build for the same power output. 

You can easily get 450 watts to 1,000 watts from one DIY homemade turbine. Like the Solar Panel description above, you store the energy in deep cycle batteries and use an inverter to make household power, day or night. 

Solar Hot Water

Solar Hot Water

The power required for a home hot water heater is about 30% of the household energy budget. The solar hot water can easily cut that in half. Solar hot water uses the greenhouse effect. 

Build a box with a glass cover and some pipes and you can get hot water in the range of 120 – 130 degrees Fahrenheit winter and summer. Feed this hot water into you hot water heater for storage and the hot water heater will shut down, no power consumption. The hot water heater will only run when a boost is required like washing clothes. The construction is cheap and easy. 

Solar Air Heater

Solar Air Heater

Think about it. Free heat for the garage, basement or out-building. No wires not power costs. Supplement your house heater with free heat from the sun for as little as $30 in parts. 

Assuming you have most of the common parts around your garage, then yes you can. Even if it costs you a little more, its a fun “DIY Project” for the weekend.  

Geothermal Heat Pumps

Geothermal typical System

Geothermal heating and cooling technology provides exceptional performance and the United States Environmental Protection Agency (EPA) agrees that a geothermal heat pump is the most energy-efficient, environmentally clean, and most cost-effective space conditioning system available. 

    Today’s best geothermal systems outperform the best gas technology, gas heat pumps, by an average of 36% in heating mode and 43% in cooling mode! 

       You can save 25-50% on home electric bills compared to conventional heating and cooling systems. Imagine what you could do with the extra money in your wallet! 

The Reason for Guides

Do you want to know how to do these projects, what materials to buy, how big or small to make things? Get a DIY guide is the answer. For under $50 you can get a step-by-step guide, a plan and in some cases where needed you get a video tutorial. 

Which guide is best? Where do you get the guide. Go to www.ResidentialEnergykit.com for help.